Smart 10 Port Gigabit Ethernet Switch For Ethernet Ring Network With 8 RJ45 Ports And Two SFP
Traditional fiber optical multiplexers are for point-to-point applications, the optical transceiver are respectively arranged on both ends of an optical fiber, such as the most commonly used fiber media converter (Ethernet media converter) , to connect the ends of optical fiber network by fiber; and in areas such as electric power, water conservancy, backbone transmission network and so on, point to point network obviously is restricted so it requires fiber cable and optical equipment to form a ring network, at this occasion, ring network fiber optical multiplexers and fiber media converters are required: optical center is a convergent type of communication signal transmission equipment, each node corresponding to the distal end (phone / video / serial port / Ethernet), such a network will maximum saves optical cable investment and improve the utilization rate of the fiber core, in the practical application is reasonable and necessary.
Therefore, ring network type equipments like fiber optical multiplexers and fiber media converters came into being. Ring type optical equipment with at least 2 or more fiber ports, it should be with self-healing protection function, when a link node fails, it can automatically select the other routing and to link to the communication center, in order to ensure the normal work of other communication nodes.
Fiberall 100M node fiber media converter (fiber optic transceiver) is with two optical interfaces, the dual port design can provide point-to-point, point to multipoint chain multi node network structure, greatly improves the flexibility of the network, it is cable to extend the network transmission distance from limit 100m copper to 120Km fiber, it is small, support both single / double fiber and flexible to form different network and also with low cost, it will become a major highlight of the fiber media converter, suitable for use in chain multipoint network like highway network system, mine communication system and so on. At the same time, Fiberall node type media converter uses optical transceiver with high quality laser and it is with stable performance, good quality and lower cost.
Specification Of Ethernet Ring Fiber Switch
| Part number | FAFS-GDSEP2R8-80 |
| Standards | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmitting distance | Dual Fiber MM:550m(50/125μm) Dual Fiber SM:10/20/40/60/80/100/120Km Cat5 UTP cable: 100m |
| LAN port | Seven FE RJ45:10/100Mbps ; One GE RJ45:10/100/1000Mbps |
| Fiber port | Two SFP : 1000Mbps, support ring network, support single fiber SM, dual fiber SM and MM |
| MAC address table | 1K |
| Buffer space | 1MKbit |
| MTBF | <1/1000000000 |
| LED indicator | PWR (power supply), G2/G3 (fiber connectivity / action), COM port setting port, RUN ring network indicator,G2/G3 fiber port indicators, run ring indicator, PWR power indicator |
| Power supply | DC5V/3A |
| Power consumption | 10W |
| Working temperature | 0~75℃ |
Product Tags:
|
|
Smart 10 Port Gigabit Ethernet Switch For Ethernet Ring Network With 8 RJ45 Ports And Two SFP Images
|
